Canon CINE-SERVO 50-1000mm T5.0-8.9 PL Manual (ja, en, zh)

Download
E132
4. Operation in Full Mode
[ I-Gain ]
Iris
Remote:
90
Auto:
50
[ ]
[ I-Gain ]
Iris
Remote:
90
Auto:
55
[ ]
Iris
[ ]
[ I-Gain ]
Torque:
High
Comp:
ON
[ I-Gain ]
Iris
Remote:
90
Auto:
50
[ ]
[ I-Gain ]
Iris
Comp:
ON
Torque:
High
[ ]
[ I-Gain ]
[Adj]
[ ]
MENU
1
A
Fr1P
[ Basic ]
[Trk]OFF
[I-Tq]H
Specifying Iris Gain
 
(1) Specifying Auto Iris Gain 
Top
Although this value is factory-set, it can be adjusted as needed.
To adjust the value, use either the auto iris gain adjustment trimmer (refer to the Lens Manual) or display operations. Regardless 
of the method of adjustment used, the most recent setting takes precedence.
The same auto iris gain value applies to all users, regardless of the current user. Thus, there is no need to switch users in 
advance. Unlike most other setting adjustments, any changes to this setting also apply to user 0.
Note:   Do the following when 
adjusting gain while checking 
iris operation.
     
→ Confi rm that the drive unit A/M 
switch is set to [Auto] mode.
     
→  Set the camera iris mode to 
[Auto].
Note:   As you look at the lens iris 
ring, set it to the position of 
maximum gain at which “focus 
hunting” does not occur.
Note:   The current iris gain value 
is retained even if you reset 
other settings as described in 
“4.2.1 Resetting Values.” For 
this reason, you will no longer 
be able to view the default 
setting. If necessary, make 
a note of the default setting 
before adjusting this value.
Press 
 once and 
 three times.
The display switches to the Iris screen.
Press 
.
[I-Gain] is underlined.
Press 
.
The display switches to the [I-Gain] screen.
Press 
.
The display reverts to Screen A.
Press 
.
[Auto] is underlined.
The previous or default value is 
highlighted.
Press 
 or 
.
Press left or right until you reach the desired function.
Initial Top Screen
Iris Screen
Screen A
[I-Gain] Screen
Options
01
to
99
Default: Varies depending on the factory-set value, but corresponds to 
the value determined with the iris gain adjustment trimmer.
Description
Minimum gain
Maximum gain
MENU
 × 3
Iris
[ ]
or
1
2
3
4
5
6