Canon CINE-SERVO 50-1000mm T5.0-8.9 PL Manual (ja, en, zh)

Download
E133
4. Operation in Full Mode
52
[ I-Gain ]
Iris
Remote:
90
Auto:
50
[ ]
[ I-Gain ]
Iris
Remote:
93
Auto:
50
[ ]
Iris
[ ]
[ I-Gain ]
Torque:
High
Comp:
ON
[ I-Gain ]
Iris
Remote:
90
Auto:
50
[ ]
[ I-Gain ]
Iris
Comp:
ON
Torque:
High
[ ]
[ I-Gain ]
[Adj]
[ ]
MENU
1
A
Fr1P
[ Basic ]
[Trk]OFF
[I-Tq]H
(2) Specifying Remote Iris Gain   
Top
Although this value is factory-set, it can be adjusted as needed.
The same remote iris gain value applies to all users, regardless of the current user. Thus, there is no need to switch 
users in advance. Unlike most other setting adjustments, any changes to this setting also apply to user 0.
Note:   Do the following when 
adjusting gain while checking 
iris operation.
     
→ Confi rm that the drive unit A/M 
switch is set to [Auto] mode.
     
→  Set the camera iris mode to 
[Remote].
Note:   The current iris gain value 
is retained even if you reset 
other settings as described in 
“4.2.1 Resetting Values.” For 
this reason, you will no longer 
be able to view the default 
setting. If necessary, make 
a note of the default setting 
before adjusting this value.
Press 
 once and 
 three times.
The display switches to the Iris screen.
Press 
.
[I-Gain] is underlined.
Press 
.
The display switches to the [I-Gain] 
screen
.
Press 
.
The display reverts to Screen A.
Press 
 twice.
[Remote] is underlined.
The previous or default value is highlighted.
Press 
 or 
.
Press left or right until you reach the desired function.
Initial Top Screen
Iris Screen
Screen A
[I-Gain] Screen
Options
01
to
99
Description
Minimum gain
Maximum gain
Default value: 90
MENU
 × 3
Iris
[ ]
 × 2
or
1
2
3
4
5
6