Canon CINE-SERVO 50-1000mm T5.0-8.9 PL Manual (ja, en, zh)
E155
4. Operation in Full Mode
Info
Encoder:
OFF
S/N
IND
ON
Info
CamSeri:
I/Fprior
Cable
/ i
IND
ON
Info
CamSeri:
Mount
/ i
I/Fprior
OFF
3D
[ I-Gain ]
[Adj]
[ ]
MENU
1
A
Fr1P
[ Basic ]
[Trk]OFF
[I-Tq]H
[I-Tq]H
Specifying the Input Route for Command Signals from the Camera
There are two input routes for command signals from the camera: via the mount and via the 12-pin cable. This setting
specifies the input route for command signals from the camera. The default setting is “Mount,” and in this case command
signals received via the mount are given priority.
However, the command signals via the 12-pin cable are received automatically if no command signals are input via the
mount. When the “Cable” setting is selected, only command signals received via the 12-pin cable are used.
specifies the input route for command signals from the camera. The default setting is “Mount,” and in this case command
signals received via the mount are given priority.
However, the command signals via the 12-pin cable are received automatically if no command signals are input via the
mount. When the “Cable” setting is selected, only command signals received via the 12-pin cable are used.
Press once and twice.
The display switches to the
Info screen.
Press five times.
[I/Fprior] is underlined.
Press or .
Press left or right to switch the function {Cable} or {Mount}.
Initial Top Screen
Info Screen
Options
(D)
Mount
Cable
Description
Via mount
Via 12-pin cable
(D): Default value
MENU
× 2
Info
× 5
or
1
2
3