Canon CINE-SERVO 50-1000mm T5.0-8.9 PL Manual (ja, en, zh)

Download
10
11
[ I-Gain ]
[Adj]
[ ]
MENU
1
A
Fr1P
[ Basic ]
[Trk]OFF
[I-Tq]H
[ I-Gain ]
[Trk]OFF
MENU
[Adj]
[ ] 1
A
Fr1P
[ Basic ]
[I-Tq]H
[ I-Gain ]
[Trk]ON
MENU
[Adj]
A
Fr1P
[ Basic ]
[I-Tq]H
[ ] 1
 
 
or
Using Digital Functions
Zoom Track Function
The zoom control range (zoom track) can be limited to preferred zoom 
range.
Setting
OFF
ON
Function
Disabled
Enabled
 Default
flashing
Enable/Disable the zoom track function
Setting the zoom track positions
1
Zoom to any preferred zoom position and keep that position.
2
Press the Instant auto-iris switch while pressing down the MEMO switch. If the zoom 
position is at the Telephoto side, the position is memorized as the zoom track Telephoto 
end. If position is at the Wide side, it is memorized as the Wide end.
3
Repeat steps   and   to set both Telephoto and Wide ends. It is possible to set only one 
end. If the zoom track position is set repeatedly at the same end, the last set position will 
be memorized.
to select a function
Top screen
Using Digital Functions
Shuttle Shot
“Shuttle” between the current zoom position and the preset zoom 
position at the fastest speed.
To use this function, the shuttle shot function “Shtl” should have been assigned to VTR, RET, or 
AUX switch in advance (P7).
Setting a specific shuttle memory position
1
Zoom in a position that you want to memorize and keep that position.
2
Press the “Shtl” switch while pressing down the MEMO switch.
The memorized position will be maintained even after the power is turned off.
Current zoom position
Previous zoom position
Shuttle memory position
Release the “Shtl” switch.
Press and hold the “Shtl” switch.
Fastest speed
Fastest speed