Olympus FE-5010 Introduction Manual (en, fr, es, de, bg, cs, da, et, fi, el, hr, hu, it, lt, lv, nl, no, pl, pt, ro, ru, sv, sl, sk, tr, uk)

Download
EN
● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please 
read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual 
in a safe place for future reference.
● We recommend that you take test shots to get accustomed to your camera before taking important 
photographs.
● In the interest of continually improving our products, Olympus reserves the right to update or modify 
information contained in this manual.
● The screen and camera illustrations shown in this manual were produced during the development stages 
and may differ from the actual product.Unless otherwise specifi ed, the explanation about these illustrations 
is provided for FE-5010/X-915.
The camera you purchased is provided with the CD-ROM Instruction Manual. For detailed information 
on the features, please refer to the Instruction Manual. Adobe Reader is required to view the Instruction 
Manual. 
Preparing the Camera
Charging the battery
  The battery charger included (AC cable or plug-in 
type) differs depending on the region where you 
purchased the camera. 
If you received a plug-in type battery charger, plug it 
directly into an AC outlet.
Example: AC cable type battery charger
1
2
3
AC outlet
AC cable
 Lithium ion battery
Battery charger
Charging indicator
On: Charging
Off: Charged
  Battery comes partially charged. Before use, be sure 
to charge the battery until the charging indicator goes 
off (for approx. 2 hours).
  If the charge indicator does not light or it blinks, the 
battery may not be inserted correctly or the battery or 
the charger may be broken.
Loading the battery and the 
xD-Picture Card™ (sold separately) 
into the camera
  Do not insert anything other than an xD-Picture Card 
or the microSD Attachment into the camera.
1
2
1
Battery/card 
compartment 
cover
Battery/card 
compartment 
lock
2
Battery lock knob
  Insert the battery by putting in the 
▼ marked side 
fi rst, with the C marks toward the battery lock knob.
Damage to the battery exterior (scratches, etc.) may 
produce heat or an explosion. 
  Insert the battery while sliding the battery lock knob 
in the direction of the arrow.
  Slide the battery lock knob in the direction of the 
arrow to unlock, and then remove the battery.
  Turn off the camera before opening the battery/card 
compartment cover.
3
Notch
Contact area
  Insert the card straight until it clicks into place.
  Do not touch the contact area directly.
4
1
2
01_Basic_d4390-96_en.indd   2
01_Basic_d4390-96_en.indd   2
2008/10/29   19:21:23
2008/10/29   19:21:23