Olympus FE-5010 Introduction Manual (en, fr, es, de, bg, cs, da, et, fi, el, hr, hu, it, lt, lv, nl, no, pl, pt, ro, ru, sv, sl, sk, tr, uk)
5
EN
Shooting closeups ( Macro shooting)
This function enables the camera to focus and shoot
subjects at close distances.
subjects at close distances.
1
Press the
& button.
2
Use mn to select the setting option, and
press the B button to set.
Option
Description
OFF
Macro mode is deactivated.
MACRO
This enables shooting as close as 10 cm/
3.9 in.
3.9 in.
*1
(60 cm/23.6 in.
*2
) to the subject.
SUPER
MACRO
MACRO
*3
This enables shooting as close as
3 cm/1.2 in. to the subject.
3 cm/1.2 in. to the subject.
*1
When the zoom is at the widest (W) position.
*2
When the zoom is at the most telephoto (T) position.
*3
The zoom is automatically fi xed.
Using the self-timer
After the shutter button is pressed all the way down,
the picture is taken after a short delay.
the picture is taken after a short delay.
1
Press the
Y button.
2
Use kl to select the desired setting
option, and press the B button to set.
Option
Description
OFF
The self-timer is deactivated.
ON
The self-timer lamp turns on for approx. 10
seconds, then blinks for approx. 2 seconds,
and then the picture is taken.
seconds, then blinks for approx. 2 seconds,
and then the picture is taken.
Self-timer shooting is automatically canceled after
one shot.
To cancel the self-timer after it starts
Press the
Y button again.
Printing
Printing images at the printer’s
standard settings [EASY PRINT]
1
Display the image to be printed on the
monitor.
Printing can also be started when the camera is
turned off. After performing Step 2, use kl
to
select [EASY PRINT], press the B button. Use mn
to
select an image, and proceed to Step 3.
2
Turn on the printer, and then connect the
printer and camera.
USB cable (supplied)
Multi-connector
OK
PC / CUSTOM PRINT
EASY PRINT START
n button
3
Press the n button to start printing.
4
To print another image, use mn to select
an image, and press the B button.
Using OLYMPUS Master 2
System requirements and
installation of OLYMPUS Master 2
Install the OLYMPUS Master 2 software by referring
to the included installation guide.
to the included installation guide.
Connecting the camera to a computer
1
Make sure the camera is turned off.
The monitor is off.
The lens is retracted.
2
Connect the camera to a computer.
The camera automatically turns on.
EASY PRINT
USB
SET
OK
EXIT
CUSTOM PRINT
PC
USB cable (supplied)
Multi-connector
●
●
●
●
01_Basic_d4390-96_en.indd 5
01_Basic_d4390-96_en.indd 5
2008/10/29 19:21:27
2008/10/29 19:21:27