Olympus FE-45 Instruction Manual (en)

Download
30
EN
Erasing data completely 
[ MEMORY FORMAT]/[ FORMAT]
E
 SETUP 
X MEMORY FORMAT/FORMAT
  Before formatting, check that no important 
data is left in the internal memory or card.
  Non-Olympus cards and cards that have 
been formatted by a computer must be 
formatted with this camera before use.
Submenu 2
Application
YES
Completely erases the image data 
in the internal memory
*1
 or card 
(including protected images).
NO
Cancels formatting.
*1 
Be sure to remove the card before formatting the 
internal memory.
Copying images in the internal memory 
to the card [ BACKUP]
E
 SETUP 
X BACKUP
Submenu 2
Application
YES
Backs up image data in the 
internal memory to the card.
NO
Cancels the backup.
  It takes some time to back up data. Check 
that the battery has suffi cient power before 
starting the backup.
Changing the  display language [W]
E
 SETUP 
X W
  “Changing the display language” (p. 13)
Submenu 2
Application
Languages
*1
The language for the menus and 
error messages displayed on the 
monitor is selected.
*1
  The available languages vary depending on the 
country and/or region where the camera was 
purchased.
Adjusting the CCD and the image 
processing function [ PIXEL MAPPING]
E
 SETUP 
X PIXEL MAPPING
  This function has already been adjusted 
at factory shipping, and no adjustment is 
needed right after purchase. Approximately 
once a year is recommended.
  For best results, wait at least one minute 
after taking or viewing pictures before 
performing pixel mapping. If the camera is 
turned off during pixel mapping, be sure to 
perform it again.
To adjust the CCD and the image 
processing function
Press the B button when [START] 
(Submenu 2) is displayed.
The camera checks and adjusts the CCD and the 
image processing function at the same time.
Menus for Other Camera Settings