Olympus FE-45 Instruction Manual (en)

Download
42
EN
 Error message
  When one of the messages below is 
displayed on the monitor, check the 
corrective action.
Error message
Corrective action
q
CARD ERROR
Card problem
Insert a new card.
q
WRITE 
PROTECT
Card problem
Use a computer to cancel the 
read-only setting.
>
MEMORY FULL
Internal memory problem
Insert a card.
Erase unwanted images.
*1

q
CARD FULL
Card problem
Replace the card.
Erase unwanted images.
*1

OK
SET
CARD SETUP
CLEAN CARD
FORMAT
Card problem
Use kl to select 
[CLEAN CARD], and press the 
B button. Take out the card, 
wipe the contact area (p. 46) 
with a soft, dry cloth, and then 
load the card again.
Use kl to select 
[FORMAT], and press the 
B button. Next, use kl 
to select [YES], and press the 
B button.
*2
IN
OK
SET
MEMORY SETUP
POWER OFF
MEMORY FORMAT
Internal memory problem
Use kl to select 
[MEMORY FORMAT], and press 
the B button. Next, use kl 
to select [YES], and press the 
B button.
*2
L
NO PICTURE
Internal memory/Card problem
Take pictures before viewing 
them.
r
PICTURE 
ERROR
Problem with selected image
Use photo retouch software, 
etc. to view the image on a 
computer. If the image still 
cannot be viewed, the image fi le 
is corrupted.
r
THE IMAGE 
CANNOT
BE EDITED
Problem with selected image
Use photo retouch software, etc. 
to edit the image on a computer.
CARD-COVER 
OPEN
Operation problem
Close the battery/card 
compartment cover.
g
BATTERY 
EMPTY
Battery problem
Insert new batteries.
If using rechargeable batteries, 
charge the batteries.

NO 
CONNECTION
Connection problem
Connect the camera and 
computer or printer correctly.
NO PAPER
Printer problem
Load paper into the printer.
NO INK
Printer problem
Refi ll the ink in the printer.
JAMMED
Printer problem
Remove the jammed paper.
SETTINGS 
CHANGED
*3
Printer problem
Return to the status where the 
printer can be used.
PRINT ERROR
Printer problem
Turn off the camera and printer, 
check the printer for any 
problems, and then turn the 
power on again.
r
CANNOT PRINT
*4
Problem with selected image
Use a computer to print.
*1
  Before erasing important images, download them to 
a computer.
*2
  All data will be erased.
*3
  This is displayed, for instance, when the printer’s 
paper tray has been removed. Do not operate 
the printer while making the print settings on the 
camera.
*4
  This camera may be unable to print images taken by 
other cameras.