Olympus E-P3 Introduction Manual (en)
54
EN
Other shooting options
2
Taking Panoramas
If you have installed the supplied computer software, you can use it to join pictures
together to form a panorama.
together to form a panorama.
g “Using OLYMPUS Viewer 2/[ib]” (P. 73)
Taking pictures for a panorama
1
Rotate the mode dial to
SCN.
2
Select [Panorama] and press
Q.
3
Use
FGHI to choose a pan direction.
4
Take a picture, using the guides to frame the
shot.
shot.
Focus, exposure, and other settings are fi xed at the
values for the fi rst shot.
values for the fi rst shot.
•
250
250 F5.6
38
M
ISO
200
5
Take the remaining images, framing each shot so that the guides overlap
with the previous picture.
with the previous picture.
[ 2 ]
250
250 F5.6
38
M
ISO
200
[ 3 ]
Exit
Exit
A panorama may include up to 10 images. A warning indicator (
g) is displayed after
the tenth shot.
6
After taking the last shot, press
Q to end the series.
#
Cautions
During panorama shooting, the image previously taken for position alignment will not be
displayed. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
displayed. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
$
Notes
Pressing
Q before shooting the fi rst frame returns to the scene mode selection menu.
Pressing
Q in the midst of shooting ends the sequence of panorama shooting, and allows
you to continue with the next one.
•
•
•