Olympus fe-300 Introduction Manual (en)

Download
Menu operations
20 
EN
The scene selection screen displays sample images and the shooting mode to best suit the situation. This can 
be set only when the mode dial is set to 
f.
• By switching to another scene, most settings will be changed to the default settings of each scene.
g “f Shooting pictures by selecting a scene mode according to the situation” (P. 12)
• When [ISO] is set to [3200] or higher, the following restriction applies.
• [IMAGE QUALITY] is limited to [2048 × 1536] or lower.
• [FINE ZOOM] is not available.
This function allows you to zoom up to approximately 19x by combining 
the optical zoom and image cropping. There is no deterioration in the  
image quality since data conversion (by increasing pixel resolution) is not 
performed.
• The available magnification varies depending on the [IMAGE QUALITY] 
setting. 
• The available [IMAGE QUALITY] setting is [SQ1] or lower.
R (still pictures)
OFF
P. 21
R (movies)
ON
P. 21
AF MODE
iESP
P. 21
f (Scene)
Shooting pictures by selecting a scene according to the situation
CAMERA MENU
WB
................................................................................................. Adjusting the color of a picture
AUTO
The white balance is adjusted automatically for natural color, 
regardless of the light source.
5
Sunny day
For shooting under a clear sky.
3
Cloudy day
For shooting under a cloudy sky.
1
Tungsten light For shooting under tungsten lighting.
w
Fluorescent 
lamp 1
For shooting under daylight fluorescent lighting. (This type of lamp is 
mainly used in homes.) 
x
Fluorescent 
lamp 2
For shooting under a neutral white fluorescent lamp. (This type of 
lamp is mainly used in desk lamps.)
y
Fluorescent 
lamp 3
For shooting under a white fluorescent lamp. (This type of lamp is 
mainly used in offices.)
ISO
......................................................................................................Changing the ISO sensitivity
AUTO
Sensitivity is automatically adjusted according to the conditions of the 
subject.
50/100/200/400/
800/1600/3200/
6400
A low value lowers the sensitivity for daylight shooting of clear, sharp 
pictures. The higher the value, the better the camera’s light sensitivity and 
ability to shoot with a fast shutter speed and in low light conditions. 
However, high sensitivity introduces noise into the resulting picture, which 
may give it a grainy appearance.
FINE ZOOM 
.............................. Zooming in on your subject without reducing image quality
Function
Factory default setting
Ref. Page
3
4
OFF /ON
d4349_33_e_0000_7.book  Page 20  Thursday, June 28, 2007  4:47 PM