Olympus fe-300 Introduction Manual (en)

Download
Menu operations
28 
EN
The date and time is saved with each image, and is used in the file name.
If the date and time are not set, the [
X] screen is displayed each time the camera is turned on.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV’s video signal type.
• TV video signal types differ by country/region. Check the video signal type before connecting the camera 
to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
When no operation has been performed for approximately 10 seconds while in shooting mode, the monitor 
automatically shuts off. Pressing the zoom lever or other buttons restores the camera from power save mode.
X
............................................................................................................Setting the date and time
VIDEO OUT
...................................................................................Playing back pictures on a TV
NTSC
/PAL
POWER SAVE
..................................................... Setting the camera to the power save mode
OFF
/ON
MENU
TIME
TIME
D
M
Y
----
----
.--.-- --:--
.--.-- --:--
CANCEL
Y / M /
Y / M / D
Y-M-D
Cancels the setting
Hour
Date formats 
(Y-M-D, M-D-Y, D-M-Y)
Minute
• The first two digits of [Y] are fixed.
• The time is displayed in the 24-hour format.
• To set the time precisely, with the cursor 
either on “minutes” or “Y/M/D”, press 
 as 
the time signal strikes 00 seconds.
Settings on the TV
Turn the TV on, and set it to video input mode.
• For details of switching to video input, refer to 
your TV’s instruction manual.
• Images and the information displayed on the 
screen may be cropped depending on the TV’s 
settings.
Settings on the camera
Turn the camera on and press 
q to select the 
playback mode.
• The last picture taken is displayed on the TV. 
Use the arrow pad to select the picture you want 
to display.
Connect to the TV’s video 
input (yellow) and audio input 
(white) terminals.
AV cable (provided)
Multi-connector
Connector cover
d4349_33_e_0000_7.book  Page 28  Thursday, June 28, 2007  4:47 PM