Olympus fe-300 Introduction Manual (en)

Download
38 
EN
Using OLYMPUS Master
1
Make sure the camera is turned off.
• The monitor is off.
• The lens is retracted.
2
Connect the multi-connector on the camera to the 
USB port on the computer using the provided USB 
cable.
• Refer to your computer’s instruction manual to locate the position 
of the USB port.
• The camera turns on automatically.
• The monitor turns on and the selection screen for the USB 
connection is displayed.
3
Select [PC], and press 
.
4
The camera is recognized by the computer.
• Windows
When you connect the camera to your computer for the first time, 
the computer attempts to recognize the camera. Click “OK” to exit the message that is 
displayed. The camera is recognized as a “Removable Disk”.
• Macintosh
The iPhoto program is the default application for managing digital images. When you connect 
your digital camera for the first time, the iPhoto application starts automatically, so close this 
application and start OLYMPUS Master.
Note
• The camera functions are disabled while the camera is connected to a computer.
• Connecting the camera to a computer via a USB hub may cause unstable operation. In this 
case, do not use a hub, but connect the camera directly to the computer.
• Images cannot be transferred to your computer with OLYMPUS Master if [PC] is selected in 
Step 3, Y is pressed and [MTP] is selected.
Windows
1
Double-click the “OLYMPUS Master 2” icon 
 on the desktop.
Macintosh
1
Double-click the “OLYMPUS Master 2” icon 
 in the “OLYMPUS 
Master 2” folder.
Connecting the camera to a computer
Start up the OLYMPUS Master software
Connector cover
Multi-connector
OK
USB
PC
EASY PRINT
CUSTOM PRINT
EXIT
SET
d4349_33_e_0000_7.book  Page 38  Thursday, June 28, 2007  4:47 PM