Olympus fe-300 Introduction Manual (en)

Download
EN
 41
Using OLYMPUS Master
Note
• If your computer is running Windows Vista, you can select [PC] in Step 3 on P. 38, press Y, 
and select [MTP] to use Windows Photo Gallery.
• Data transfer is not guaranteed in the following environments, even if your computer is 
equipped with a USB port.
• Computers with a USB port added by means of an extension card, etc.
• Computers without a factory-installed OS and home-built computers
Please take care that your battery is fully charged!
1
Make sure that your computer is connected to the Internet.
2
Plug the USB cable into the USB port on the computer.
3
Plug the other end of the USB cable into the camera’s USB connector.
• The camera turns on automatically.
• The monitor turns on and the selection screen for the USB connection is displayed.
4
Select [PC], and press 
.
5
In the browse window, select “Camera”, then “Update Camera/Add 
Display Language”.
• The confirmation window for updating is displayed.
6
Click “OK”.
• The updating the camera window is displayed.
7
Click “Add Language” in the updating 
camera display.
• The “Add Display Language of Camera” window 
is displayed.
8
Click 
 and select a language.
9
Click “Add”.
• The new language is downloaded to your camera. 
Please do not remove any cable or the battery while the 
camera is processing.
10
After the download procedure the camera 
display will show “OK”. You can remove the cables and turn power off. 
After restarting the camera  you will be able to choose the new language 
from [SET UP].
To increase the number of languages
d4349_33_e_0000_7.book  Page 41  Thursday, June 28, 2007  4:47 PM