Netgear R6900 - Nighthawk AC1900 Smart WiFi Router User Manual (en)

Download
To configure a port group and enable the bridge:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > VLAN/Bridge Settings.
The VLAN / Bridge Settings page displays.
5.
Select the Enable VLAN/Bridge Group check box.
The page expands.
6.
Select the By bridge group radio button.
7.
Select a Wired Ports check box or a Wireless check box.
If your device is connected to an Ethernet port on the router, select the Wired Ports check box that corresponds
to the Ethernet port on the router to which the device is connected.
If your device is connected to your router’s WiFi network, select the Wireless check box that corresponds to
the router’s WiFi network to which the device is connected.
Manage the WAN and LAN Network Settings
156
Nighthawk AC1900 Smart WiFi Router Model R6900