Netgear R6900 - Nighthawk AC1900 Smart WiFi Router User Manual (en)

Download
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Traffic Meter.
5.
Select the Enable Traffic Meter check box.
6.
Select the Traffic volume control by radio button.
7.
From the corresponding menu, select an option:
Download only. The restriction is applied to incoming traffic only.
Both Directions. The restriction is applied to both incoming and outgoing traffic.
8.
In the Monthly Limit field, enter how many MBytes (MB) per month are allowed.
9.
If your ISP charges you for extra data volume when you make a new connection, enter the extra data volume
in MB in the Round up data volume for each connection by field.
10.
In the Traffic Counter section, set the traffic counter to begin at a specific time and date.
11.
In the Traffic Control section, enter a value in minutes to specify when the router issues a warning message
before the monthly limit in hours is reached.
This setting is optional. The router issues a warning when the balance falls under the number of minutes that
you enter. By default, the value is 0 and no warning message is issued.
12.
Select one or more of the following actions to occur when the limit is reached:
Manage the Router and Monitor the Traffic
203
Nighthawk AC1900 Smart WiFi Router Model R6900