Netgear R6900 - Nighthawk AC1900 Smart WiFi Router User Manual (en)

Disconnect and disable the Internet connection. This setting is optional. When the traffic limit is reached,
the Internet connection is disconnected and disabled.
Click the Apply button.
Your settings are saved and the router restarts.
The Internet Traffic Statistics section helps you to monitor the data traffic. For more information, see 
 on page 201.
Unblock the Traffic Meter After the Traffic Limit Is Reached
If you configured the traffic meter to disconnect and disable the Internet connection after the traffic limit is reached,
you cannot access the Internet until you unblock the traffic meter.
If your ISP set a traffic limit, your ISP might charge you for the overage traffic.
To unblock the traffic meter:
Launch a web browser from a computer or WiFi device that is connected to the network.
A login window opens.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
Select ADVANCED > Advanced Setup > Traffic Meter.
The Traffic Meter page displays.
In the Traffic Control section, clear the Disconnect and disable the Internet connection check box.
Click the Apply button.
Your settings are saved and the router restarts.
Manage the Router Remotely
The remote management feature lets you access your router securely over the Internet to view or change its settings.
You must know the router’s WAN IP address to use this feature. For information about a different type of remote
access, that is, remote access using Dynamic DNS, see 
 on page 119.
Manage the Router and Monitor the Traffic
Nighthawk AC1900 Smart WiFi Router Model R6900