Netgear R6900 - Nighthawk AC1900 Smart WiFi Router User Manual (en)

Download
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically
assigns this address.
Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the
IP address of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it also.
13.
Select a Router MAC Address radio button:
Use Default Address. Use the default MAC address.
Use Computer MAC Address. The router captures and uses the MAC address of the computer that you
are now using. You must use the one computer that the ISP allows.
Use This MAC Address. Enter the MAC address that you want to use.
14.
Click the Apply button.
Your settings are saved.
15.
Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see 
Specify an IPv6 Internet Connection
The router supports many different types of IPv6 Internet connections for which you can specify the settings manually.
IPv6 Internet Connections and IPv6 Addresses
The router can support an IPv6 Internet connection through the following connection types:
Auto Detect. For more information, see 
Auto Config. For more information, see 
 on page 36.
6to4 tunnel. For more information, see 
 on page 37.
Pass-through. For more information, see 
Fixed. For more information, see 
DHCP. For more information, see 
 on page 41.
6rd. For more information, see 
PPPoE. For more information, see 
 on page 45.
Which connection type you must use depends on your IPv6 ISP. Follow the directions that your IPv6 ISP gave you.
Specify Your Internet Settings
33
Nighthawk AC1900 Smart WiFi Router Model R6900