Netgear R6900 - Nighthawk AC1900 Smart WiFi Router User Manual (en)

The BASIC Home page displays.
Select ADVANCED > Advanced Setup > IPv6.
The Basic Settings page displays.
From the Internet Connection Type menu, select 6to4 Tunnel.
The router automatically detects the information in the Router’s IPv6 Address on LAN field. This field shows the
IPv6 address that is acquired for the router’s LAN interface. The number after the slash (/) is the length of the
prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field
displays Not Available.
Select a Remote 6to4 Relay Router radio button:
Auto. Your router uses any remote relay router that is available on the Internet. This is the default setting.
Static IP Address. Enter the static IPv4 address of the remote relay router. Your IPv6 ISP usually provides
this address.
Select an IPv6 Domain Name Server (DNS) Address radio button:
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically
assigns this address.
Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the
IP address of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it also.
Select an IP Address Assignment radio button:
Use DHCP Server. This method passes more information to LAN devices but some IPv6 systems might not
support the DHCv6 client function.
Auto Config. This is the default setting.
Specify Your Internet Settings
Nighthawk AC1900 Smart WiFi Router Model R6900