Fujifilm FUJIFILM X-E1 Owner's Manual (en)

 For Your Safety
 For  Your  Safety
•  Read Instructions: All the safety and operating instructions 
should be read before the appliance is operated.
•  Retain Instructions: The safety and operating instructions 
should be retained for future reference.
•  Heed Warnings: All warnings on the appliance and in the 
operating instructions should be adhered to.
•  Follow Instructions: All operating and use instructions 
should be followed.
Power Sources: This video product should be operated only 
from the type of power source indicated on the marking la-
bel.    If you are not sure of the type of power supply to your 
home, consult your appliance dealer or local power com-
pany.    For video products intended to operate from battery 
power, or other sources, refer to the operating instructions.
Grounding or Polarization: This video product is equipped 
with a polarized alternating-current line plug (a plug having 
one blade wider than the other).   This plug will fi t into the 
power outlet only one way.   This is a safety feature.    If you 
are unable to insert the plug fully into the outlet, try revers-
ing the plug.    If the plug should still fail to fi t, contact your 
electrician to replace your obsolete outlet.    Do not defeat 
the safety purpose of the polarized plug.
Alternate Warnings: This video product is equipped with 
a three-wire grounding-type plug, a plug having a third 
(grounding) pin.   This plug will only fi t into a grounding-
type power outlet.   This is a safety feature.    If you are unable 
to insert the plug into the outlet, contact your electrician to 
replace your obsolete outlet.    Do not defeat the safety pur-
pose of the grounding type plug.
Overloading: Do not overload wall outlets and extension 
cords as this can result in a risk of fi re or electric shock.
Ventilation: Slots and openings in the cabinet are provided 
for ventilation, to ensure reliable operation of the video 
product and to protect it from overheating, and these open-
ings must not be blocked or covered.   The openings should 
never be blocked by placing the video product on a bed, 
sofa, rug, or other similar surface.
This video product should not be placed in a built-in instal-
lation such as a bookcase or rack unless proper ventilation 
is provided or the manufacturer’s instructions have been 
adhered to.   This video product should never be placed near 
or over a radiator or heat register.
Attachments: Do not use attachments not recommended by 
the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near wa-
ter—for example, near a bath tub, wash bowl, kitchen sink, 
or laundry tub, in a wet basement, or near a swimming pool, 
and the like.
Power-Cord Protection: Power-supply cords should be routed 
so that they are not likely to be walked on or pinched by 
items placed upon or against them, paying particular at-
tention to cords at plugs, convenience receptacles, and the 
point where they exit from the appliance.
Accessories: Do not place this video product on an unstable 
cart, stand, tripod, bracket, or table.   The video product may 
fall, causing serious injury to a child or adult, and serious 
damage to the appliance.    Use only with a cart, stand, tri-
pod, bracket, or table recommended by the manufacturer, or 
sold with the video product.    Any mounting of the appliance 
should follow the manufacturer’s instructions, and should use 
a mounting accessory recommended by the manufacturer.
An appliance and cart combination 
should be moved with care.    Quick 
stops, excessive force, and uneven 
surfaces may cause the appliance 
and cart combination to overturn.
Outdoor Antenna Grounding: If an outside antenna or cable 
system is connected to the video product, be sure the anten-
na or cable system is grounded so as to provide some protec-
tion against voltage surges and built-up static charges.    Sec-
tion 810 of the National Electrical Code, ANSI/NFPA No. 70, 
provides information with respect to proper grounding of the 
mast and supporting structure, grounding of the lead-in wire 
to an antenna discharge unit, size of grounding conductors, 
location of antenna discharge unit, connection to grounding 
electrodes, and requirements for the grounding electrode.
Antenna Lead 
in Wire
Ground Clamp
Grounding Conductors 
(NEC SECTION 810-21)
Power Service Grounding Electrode 
System (NEC ART 250. PART H)
Discharge Unit 
Electric Service 
Ground Clamps
Power Lines: An outside antenna system should not be lo-
cated in the vicinity of overhead power lines or other electric 
light or power circuits, or where it can fall into such power 
lines or circuits.    When installing an outside antenna system, 
extreme care should be taken to keep from touching such 
power lines or circuits as contact with them might be fatal.
Cleaning: Unplug this video product from the wall outlet be-
fore cleaning.    Do not use liquid cleaners or aerosol cleaners.  
Use a damp cloth for cleaning.
Object and Liquid Entry: Never push objects of any kind into this 
video product through openings as they may touch dangerous 
voltage points or short out parts that could result in a fi re or elec-
tric shock.  Never spill liquid of any kind on the video product.
Lightning: For added protection for this video product re-
ceiver during a lightning storm, or when it is left unattended 
and unused for long periods of time, unplug it from the wall 
outlet and disconnect the antenna or cable system.  This will 
prevent damage to the video product due to lightning and 
power-line surges.