Samsung SCC-B5397P User Manual (en, fr, de, es, it)

Download
20 – DIGITAL COLOR DOME CAMERA
How to use OSD Menu
FLICKERLESS [OFF, 
ON]
If set to ON, the shutter speed will be fi xed to 
1/100(PAL:1/120) second. This will prevent possible screen 
distortion due to a mismatch between the vertical sync 
frequency and the blinking frequency of the lighting.
Note : 
If the SHUTTER menu is set to AUTO or FIX mode, the 
FLICKERLESS menu will not be available.
If the SENS-UP function is set to FIX mode, the Flickerless 
menu will be deactivated.
If AGC is set to FIX mode, the FLICKERLESS function will 
be disabled.
XDR (eXtended Dynamic Range)
[OFF, LOW, MID, HIGH]
Actively controls the gamma compensation in the 
way it operates the ambient luminance contrast 
in a certain pixel unit to determine the optimal 
visibility.
Select one from OFF, LOW, MID and HIGH. 
Closing to HIGH will increase the compensation 
level.
DAY/NIGHT  
[DAY,NIGHT,AUTO,EXT]
DAY
If set to DAY, it will be fi xed to DAY mode 
regardless of the ambient conditions. 
NIGHT
If set to NIGHT, it will be fi xed to Black-and-White 
mode regardless of the ambient conditions.
If you press the SETUP switch with a NIGHT sub 
menu selected, you will see a menu where you can 
set Burst to OFF/ON.
If BURST is set to ON, the Burst signal will output 
together with the black-and-white composite video 
signal. If BURST is set to OFF, the Burst signal does 
not output.
You can set the BURST option to OFF/ON, or 
select to output the Burst signal in NIGHT mode.
AUTO
The camera will automatically switch between 
DAY and NIGHT mode, according to the lighting 
condition.
If you press the SETUP switch with an AUTO-
based sub menu selected, you will see the 
appropriate screen.
AUTO
BURST OFF
DAYÆNIGHT
 BRIGHTNESS 
MID
 DWELL TIME 
 2S
NIGHTÆDAY
 BRIGHTNESS 
MID
 DWELL TIME 
5S
MASK AREA 
1  2
                   
You can set the BURST option to OFF/ON, or 
select to output the Burst signal in NIGHT mode.
The BRIGHTNESS of DAY
ÆNIGHT sets the 
brightness degree of color to BW switching, 
for which you can select from LOW, MID, and