Samsung SCC-B5397P User Manual (en, fr, de, es, it)

Download
English
 –
 23
ENG
How to use OSD Menu
e.
 
DIGITAL ZOOM
RATIO [X1.0]
< LOCATION > 
                    
-  LOCATION : If you press the SETUP switch in the 
condition where the image is enlarged as much as the 
ratio setting, you can watch an invisible area of the 
effective screen as well using the 
cdef
 switch.
Note : 
If the digital zoom factor is set to larger than 1x, the FENCE 
function will be deactivated.
The DIGITAL ZOOM function enlarges the pixel itself, which can 
cause deterioration of the quality.
DETAIL [0~3]
Controls the horizontal or vertical distinction.
V-SYNC  
[INT, 
LINE]
Select the vertical sync mode for INT or LINE.
If you select INT, the camera will use the internal 
synchronization.
If selecting LINE, the camera will use the external 
power source frequency for the synchronization.
You can adjust the LL-PHASE.
Note : 
Use of DC 12V will fi x V-SYNC to INT, which can not be 
changed.
AGC COLOR SUP 
[LOW , MID, HIGH]
Adjust the color scheme according to the AGC value.
REVERSE 
 
[OFF, H, V, H/V]
Mirrors video signals horizontally, vertically, or both.
POSI/NEGA  
[+, 
-]
Output as it is or mirror the video brightness signal.
PIP  
 
[OFF, 
ON]
Displays a sub image together with the main image on 
the same screen using the Picture In Picture function.
Note : 
If more than one privacy zone is set and the PRIVACY SET is 
set to ON, the PIP function will be deactivated.
If the INTELLIGENCE function is set to FENCE mode, the PIP 
menu will be deactivated.
DIS  
 
[OFF, 
ON]
Digital Image Stabilization will set the anti-shake 
compensation.
Note : 
If you set DIS to ON, the compensation area will be enlarged as 
set in the digital zoom factor.
If you set the digital zoom factor to greater than the enlarged 
zoom factor for the compensation, the DIS function will be 
deactivated.