Canon multipass c3000 Service Manual (en)

Download
7. COMMUNICATION SYSTEM OPERATIONS
7.1 FAX/TEL Switching
This fax is set to automatically switch between fax and telephone, on the same telephone
line.  If the other party is a fax, the fax is received automatically, and if the other party is a
telephone, the alarm in the main unit is rung to alert the user.
7.1.1 Settings
(1) Press the 
RECEIVE MODE
button to select Fax/Tel mode.
(2) Set the 
“F/T SW ACTION”
in 
RECEIVE (RX) SETUP 
menu (see the 
MultiPASS Desktop
Manager for Windows User’s Guide for instruction
)
7.1.2 Parameters
Default
Setting
Selection 
Item
setting
switch
range
RING START TIME
8 sec.
User data
0 to 30 sec. 
(Pseudo Ring start time)
F/T RING TIME
15 sec.
User data
10 to 45 sec.
(Pseudo Ring time)
F/T SW ACTION
RECEIVE User data
RECEIVE/
(Operation after FAX/TEL switching)
DISCONNECT
Pseudo RBT frequency
400 Hz
None
None (fixed)
Pseudo RBT transmission from CML
4 sec.
Service data #3 16
0 to 9 sec.
on time until start (CNG detection time)
Pseudo RBT pattern on time
1000 ms
Service data #3 17
0 to 9990 ms
Pseudo RBT pattern off time (short)
0 ms
Service data #3 18
0 to 9990 ms 
Pseudo RBT pattern off time (long)
2000 ms
Service data #3 19
0 to 9990 ms
Pseudo RBT transmission level
-23 dBm
Service data #3 24
-23 to -8 dBm
Pseudo ring frequency
25Hz
Service data #2 10
17Hz/25Hz/50Hz
Pseudo ring pattern on time
1000 ms
Service data #3 20
0 to 9990 ms
Pseudo ring pattern off time (short)
0 ms
Service data #3 21
0 to 9990 ms
Pseudo ring pattern off time (long)
2000 ms
Service data #3 22
0 to 9990 ms
CNG detection level
-47 dBm
Service data #3 23
-50 to -29 dBm
Chapter 2: Technical Reference
2-33