Canon multipass c3000 Service Manual (en)

Download
e) New error codes and recovery methods
There is no new error code in this model.
Note, however, the following supplementary information, as the machine requires
different actions than the existing models to correct:
##342 Cleaning absorption waste ink capacity full
Solution:
Unlike errors that trigger the "
CHECK PRINTER
" message,  This error
is programmed so that it cannot be cleared using the 
STOP
button.
Replace the waste ink absorber as follows in the error occurs:
(1) Select 
3. INK ABS CAPA
under 
#7 PRINTER
in service mode, and the
counter to 0.
(2) When 
4.PRINTER RESET
appears under 
#7 PRINTER
in  response
to step (1), press the 
START/COPY
button and the * button to reset
the printer.
The error will be cleared,  and the image stored in memory will
automatically be printed.
(3) Check to make sure that no image exist in memory; then, turn off
the power,  remove the appropriate parts,  and replace the waste ink
absorber.
Part 1: Facsimile
3-24