Canon multipass c3000 Service Manual (en)

Download
b) Operation panel tests
The operation panel test is selected by pressing the 
7
button from the faculty test menu.
In this test, check that the display, LED lamps, and buttons on the control  panel are
operating correctly.
b-1) Display test
Pressing the 
START/COPY
button from the control panel menu, "
H
" is displayed 16
characters by 1 line on the display.  The next time the 
START/COPY
button is pressed,
all the LCD dots on the display are displayed.  Check for any LCD dots in the display
that are not displayed.
b-2) LED lamp test
The LED lamp test is selected by pressing the 
START/COPY
button after the display
test.
When the 
START/COPY
button is pressed, all the lamps on the control panel light.
Check for any LED that does not light during the test.
b-3) Operation button test
The Operation button test is selected by pressing the 
START/COPY
button after the
LED lamp test.
In this test, you press the button corresponding to the displayed character to put it out.
The table giving the correspondence between the characters and the buttons is below.
Character
Operation button
Character
Operation button
1-#
Numeric buttons
$
Resolution button
&
Receive mode button
R
Redial button
F
Function button
D
Coded dial button
C
Cartridge button
M
Resume button
When all the characters displayed have gone out, the system next starts the one-touch
speed dialing button test.  The letters a-f are displayed on the display, corresponding to
one-touch speed dialing buttons 01-06.  Each letter displayed on the display goes out
when its corresponding one-touch speed dialing button is pressed.
In this test, check for operation buttons whose corresponding character or letter does not
go out when the button is pressed.
Part 1: Facsimile
3-54