Canon multipass c3000 Service Manual (en)

Download
Part 1: Facsimile
1-30
Powering Up
C
Follow these guidelines when connecting your C3000 to a power source:
The C3000 is intended for use in the U.S. and Canada only and
requires 120 VAC. Do not use it outside the U.S. or Canada.
Plug the C3000 only into a 120-volt AC, 60-Hz, three-prong
grounded outlet.
Use only the power cord that came with the unit. Using a longer
cord or extension cord can cause the C3000 to malfunction.
Unplug the unit only by pulling on the plug itself. Never pull on the
cord.
Do not plug the C3000 into an outlet shared with an appliance such
as an air conditioner, computer, electric typewriter, or copier. These
devices generate electrical noise, which can interfere with the
C3000’s operation.
Make sure nothing is laying on the power cord, and that the cord
cannot be walked on or tripped over.
Do not overload the electrical outlet. Make sure the total amperage
used by all the machines plugged into the outlet does not exceed the
ampere rating of the outlet’s circuit breaker.
IB2-21