Canon PowerShot S1 IS User Manual (en)

Download
85
• Your camera model name, [Canon Camera] or a camera icon does not display 
in the [Scanners and Cameras Properties] dialog or the [Scanners and 
Cameras] folder.
Solution 1:
Start with the following procedures.
Install the USB driver with the procedures in Installing the Software and USB 
Driver
 (p. 10). Then connect the camera to the computer with the interface 
cable and prepare it to transfer data. If the USB driver is already installed, 
uninstall it first and then reinstall it.
Solution 2:
If the problem is not resolved with the procedures in Solution 1, continue by 
implementing the following procedures. The specific steps are explained below.
1. Check to see if the camera is being recognized as an “other” device.
2. Delete the driver and the setup information files if it is being recognized as an 
“other” device.
3. Reinstall the driver.
This section explains the specific steps for each operating system.
Windows XP and Windows 2000 
<Check to see if the camera is being recognized as an “other” device and 
delete the driver if it is.>
1. Windows XP: Click the [Start] menu, followed by [Control Panel], 
[Performance and Maintenance] and [System].
Windows 2000: Click the [Start] menu and select [Settings] and [Control 
Panel]. Double-click the [System] icon.
2. Click the [Hardware] tab, followed by [Device Manager].
3. Click the 
 symbol beside the [Other devices] and/or [Imaging devices] 
category. Your camera model name or [Canon Camera] will display in these 
categories if it is being recognized as an “other” device.
Users of Windows XP and Windows 2000 must first log in as an 
Administrator (computer system administrator) to delete a driver.