Sony cyber-shot dsc-t9 User Manual (en)

Download
74
Printing images directly using a PictBridge 
compliant printer
Even if you do not have a computer, you 
can print images shot using your camera by 
connecting the camera directly to a 
PictBridge compliant printer.
• “PictBridge” is based on the CIPA standard. 
(CIPA: Camera & Imaging Products 
Association)
In single-image mode
You can print a single image on a printing 
sheet.
In index mode
You can print several images at a reduced 
size on a printing sheet. You can print a set 
of either the same images (1) or different 
images (2).
1
2
• An index print function may not be provided 
depending on the printer.
• The quantity of images that can be printed as an 
index image differ depending on the printer.
• You cannot print movies.
• If the 
 indicator flashes on the screen of the 
camera for about five seconds (error 
notification), check the connected printer.
Prepare the camera to connect it to the 
printer with the cable for multi-use 
terminal. When connecting the camera to a 
printer that is recognized when [USB 
Connect] is set to [Auto], Stage 1 is 
unnecessary.
• It is recommended to use a fully charged battery 
pack or an AC Adaptor (not supplied) to prevent 
the power from turning off partway through 
printing.
1
Press MENU to display the menu.
2
Press B on the control button to 
select  
(Setup).
3
Select [
] (Setup2) with V, then 
select [USB Connect] with v/V/B.
4
Select [PictBridge] with B/v, then 
press 
z.
The USB mode is set.
Stage 1: Preparing the camera
Index button
Control Button
MENU button
2