Sony DXC-390P User Manual (fr, en, de, es)

Download
Chapter 3   Installation and Connections     
47
 (GB)
Chapter 3
Basic System Connection
To supply power to the camera, use the CMA-D2/D2MD/
D2CE/D2MDCE camera adaptor.
There are two methods for connecting the camera and the
camera adaptor.
• Using the CCDC cable which only supplies power to the
camera (For connecting method, see page 48.)
• Using the CCMC cable which supplies power to the
camera and transmits video signals to the camera adaptor
(For connecting method, see page 49.)
The camera adaptor you can use with your camera varies
with the signal systems and uses.
                System
   Use
Medical
Non-medical
EIA standard, NTSC
color system
CMA-D2MD
CMA-D2
CCIR standard,
PAL color system
CMA-D2MDCE
CMA-D2CE
Note on use of camera adaptors
Be sure to use one camera adaptor for each DXC-390/390P
unit.
Although the camera adaptor has two CAMERA connectors
(4-pin and 12-pin), the power consumption of the camera is
such that two camera units cannot be connected at the same
time.
Note on connections
Be sure to turn off the power supply for all equipment
before making any connections.