Canon PowerShot SX60 HS Owner's Manual (en)

19

 

●

Holding the battery pack with the 
terminals (1) facing as shown, press the 
battery lock (2) in the direction of the 
arrow and insert the battery pack until the 
lock clicks shut.

 

●

If you insert the battery pack facing the 
wrong way, it cannot be locked into the 

correct position. Always confirm that the 
battery pack is facing the right way and 
locks when inserted.

 

●

Recording is not possible on memory 
cards with a write-protect tab when the 
tab is in the locked position. Slide the tab 
to the unlocked position.

 

●

Insert the memory card with the label (1) 
facing as shown until it clicks into place.

 

●

Make sure the memory card is facing the 
right way when you insert it. Inserting 
memory cards facing the wrong way may 
damage the camera.

 

●

Lower the cover in the direction of the 
arrow and press it until it clicks into the 
closed position.

 

●

For guidelines on how many shots or hours of recording can be 
saved on one memory card, see “Number of Shots per Memory 
Card” (

(1)

(2)

(1)

 

●

For details on charging time and the number of shots and 
recording time possible with a fully charged battery pack, see 
“Number of Shots/Recording Time, Playback Time” (

 

●

Charged battery packs gradually lose their charge, even when 
they are not used. Charge the battery pack on (or immediately 
before) the day of use.

 

●

As a visual reminder of the charge status, attach the battery cover 
with 

 visible on a charged battery pack and concealed on an 

uncharged one.

 

●

The charger can be used in areas with 100 – 240 V AC power 
(50/60 Hz). For power outlets in a different format, use a 
commercially available adapter for the plug. Never use an 
electrical transformer designed for traveling, which may damage 
the battery pack.

Insert the included battery pack and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted 
in another device), you should format the memory card with this camera 
(

 

●

Slide the switch (1) and open the cover 
(2).

(2)

(1)