Nikon 18-55mm User Manual (ja, en, de, fr, es, sv, ru, nl, it, zh, ko)

Download
14
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
Thank you for purchasing the AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR. DX Nikkor lenses are specially designed for 
use with Nikon digital-SLR (Nikon DX format) cameras, such as the D2-series and D40-series. When mounted on 
Nikon DX-format cameras, the lens’ picture angle is equivalent to approximately 1.5
× the focal length in 35mm 
format. Before using this lens, please read these instructions and refer to your camera’s User’s Manual.
Major features
• Enabling vibration reduction (VR) allows for shooting 
at shutter speeds approximately three stops* slower 
(at a focal length of 55mm) than when vibration 
reduction is disabled, thus expanding the range of 
effective shutter speed options, and simplifying 
hand-held shooting at a variety of zoom positions. 
(*Based on results achieved under Nikon 
measurement conditions. The effects of vibration 
reduction may vary by individual and/or shooting 
conditions.)
• This lens employs a Silent Wave Motor to drive the 
focusing mechanism, making autofocusing smooth, 
silent and almost instantaneous. The A-M mode 
switch 9 is provided for simple selection of 
autofocus (A) or manual focus (M) operation.
• More accurate exposure control is possible because 
subject distance information is transferred from the 
lens to the camera body.
• The use of one aspherical lens elements ensures sharp 
pictures virtually free of color fringing. Also, by utilizing 
a seven-blade diaphragm that results in a nearly 
circular aperture, out-of-focus objects in front of, or 
behind, the subject are rendered as pleasing blurs.
Mounting the lens
1
Turn the camera off.
2
Remove the rear lens cap (Fig. D).
3
Keeping the mounting index 7 on the lens aligned 
with the mounting mark on the camera body, 
rotate the lens counterclockwise until it clicks into 
place. Be sure that the mounting index 7 is on the 
uppermost side.
4
Remove the front lens cap. (Fig. C)
Removing the lens
Be sure to turn the camera off before removing the lens. 
Press and hold the lens-release button while turning 
the lens clockwise to remove.
Using the lens hood HB-45 1* (Fig. B) 
*Optional.
Attaching the hood
Hold down the lens hood attachment buttons 2 
when attaching the lens hood 1. To store the lens 
hood 1, attach it in the reverse position.
Removing the hood
Hold down the lens hood attachment buttons 2 
when removing the lens hood 1.