Fujifilm A600 Owner's Manual (en)

Download
113
Troubleshooting
Connecting
Matters
Problems
Possible causes
Solutions
Page
Connecting to TV
There is no image 
or sound on the 
TV.
The camera is not connected to the TV 
correctly.
Connect the camera and TV correctly.
77
The included A/V cable was connected 
during movie playback.
After the movie playback mode is stopped, 
connect the camera and TV correctly.
67, 77
“TV” is selected as the TV input.
Set the TV input to “VIDEO”.
77
The video output setting is incorrect.
Change the setting to NTSC or PAL.
69, 71
The TV volume is turned down.
Adjust the volume.
77
The TV image is 
black and white.
The video output setting is incorrect.
Change the setting to NTSC or PAL.
69, 71
Connecting to PC
PC does not 
recognize the 
camera.
The USB cable (mini-B) is not correctly 
connected to the PC or camera.
Set up the camera, and connect the USB 
cable (mini-B) correctly.
89
< PICTBRIDGE is selected in 
L USB MODE in the SET-UP menu.
Perform the below steps to cancel the 
setting before selecting @ DSC.
• Windows
A The “New Hardware Found” wizard or 
“Scanner and Camera” wizard appears.
If the wizard does not appear, proceed 
to step C.
B Click the [Cancel] button.
C Disconnect the camera from the PC.
• Macintosh
A The window for locating the driver appears.
If the window does not appear, proceed 
to step C.
B Click the [Cancel] button.
C Disconnect the camera from the Macintosh.
89
Connecting to 
printer
Cannot print with 
PictBridge.
@ DSC is selected in L USB MODE 
in the SET-UP menu.
Select < PICTBRIDGE.
78
SU1840GB.book  Page 113  Thursday, May 11, 2006  11:44 PM