Pentax K-5 II User Manual (en)

Download
171
5
U
s
ing
 the 
Flas
h
Set the camera to wireless flash mode when using an external flash in 
combination with the built-in flash.
1
Remove the external flash unit after the channel is set on 
the camera, and place it at the desired location. 
2
Press the four-way controller (3).
The [Flash Mode] screen appears.
3
Select r and press the 4 
button.
The camera is ready to take a picture.
The channel for the built-in flash is 
displayed in the viewfinder and on the 
LCD panel. The factory default setting is 
CH1.
4
Press the E button. 
5
Confirm that both flashes are fully charged, and then take 
a picture. 
Wireless Shooting Using a Combination of the Built-in 
Flash and an External Flash Unit
• r cannot be set when the exposure mode is set to B (Green).
• When the drive mode is set to i (Remote Control (3s delay)), d (Mirror 
Lock-up) or e (Mirror Lock-up + Remote Control), or the lens aperture is not 
set to the s position, r cannot be selected.
Flash Mode
Wireless Mode
Cancel
OK
OK
MENU
0.0