Pentax K-5 II User Manual (en)

Download
172
U
s
ing
 the 
Flas
h
5
1
Set the wireless mode of the external flash directly 
connected to the camera to [MASTER] or [CONTROL].
2
On the wireless remote flash unit, set the wireless flash 
mode to [SLAVE] and set the channel to the same channel 
as the flash directly connected to the camera. Then, place 
it at the desired location.
3
Confirm that both flashes are fully charged and then take 
a picture.
Wireless Shooting Using a Combination of External 
Flash Units
MASTER
Discharges both the flash directly connected to the 
camera and the wireless flash unit as the main flash. 
CONTROL
Discharges the flash directly connected to the camera as 
a control flash only, not as the main flash.
• The Shake Reduction function is automatically turned off in wireless mode.
• When using multiple AF540FGZ/AF360FGZ external flashes and performing 
high-speed flash sync shooting in wireless mode, set the flash directly 
connected to the camera to high-speed flash sync mode.
• When the wireless mode of the external flash directly connected to the 
camera is set to [MASTER] or [21. Flash in Wireless Mode] (p.172) is set to 
[On] for the built-in flash, all the flashes will discharge simultaneously.
Changing the Built-in Flash Discharge Method
You can change the built-in flash discharge method used in wireless 
mode.
Set in [21. Flash in Wireless Mode] of the [A Custom Setting 3] 
menu.
1
On
Discharges the built-in flash as a master. (default setting)
2
Off
Discharges the built-in flash as a control flash.
HSb (High-speed flash sync) is not available with the built-in flash.