Pentax K-5 II User Manual (en)

Download
86
Sho
o
ting
 Func
tion
s
4
2
Press the four-way controller (5
and use the four-way controller 
(
23) to select [Auto], [Off], 
[Low], [Medium], [High] or 
[Custom].
3
Press the 4 button.
If you select [Auto], [Off], [Low], [Medium], or [High], proceed to Step 7.
4
Use the four-way controller (23) to select [Setting] and 
press the four-way controller (
5).
The screen to set the noise reduction level according to the sensitivity appears.
5
Use the four-way controller (23
to select a sensitivity value and use 
the four-way controller (
45) to set 
the level of noise reduction which is 
applied to the selected sensitivity.
Turn the rear e-dial (S) to display the 
[High-ISO NR 2] screen.
Press the | button to reset the setting of 
the selected sensitivity value.
The sensitivity values displayed vary according to the [1. EV Steps] and [2. 
Sensitivity Steps
] settings made in the [A Custom Setting 1] menu.
6
Press the 3 button.
The screen that was displayed in Step 2 appears again.
7
Press the 3 button twice.
The camera is ready to take a picture.
Auto
Applies Noise Reduction at optimally calculated levels 
throughout ISO range. (default setting)
Off
Does not apply Noise Reduction at any ISO setting.
Low/Medium/
High
Applies Noise Reduction at constant chosen level 
throughout ISO range.
Custom
Applies Noise Reduction at user-defined levels for each ISO setting.
High-ISO NR
Cancel
OK
OK
MENU
Off
Low
Medium
Auto
Custom
High
ISO
NR
AUTO
ISO
NR
CUSTOM
ISO
NR
OFF
ISO
NR
ISO
NR
ISO
NR
MENU
1
2
High-ISO NR
Reset
100
ISO
200
ISO
400
ISO
1600
ISO
3200
ISO
800
ISO
ISO
NR
OFF
ISO
NR
OFF
ISO
NR
OFF
ISO
NR
ISO
NR
ISO
NR
80
ISO
ISO
NR
OFF