Sony DSC-WX220 Leaflet (en)

Download
How to use
Inserting the battery pack
Battery eject lever
Open the cover.
Insert the battery pack.
Charging the battery pack
Turn off the camera while charging the battery.
Power cord
(Mains lead)
For customers in 
countries/regions
other than the USA, 
Canada and China
For customers in the USA, 
Canada and China
Charge lamp
Lit: Charging
Off: Charging finished
Flashing:
Charging error or charging paused 
temporarily because the camera is not 
within the proper temperature range
Connect the camera to the AC Adaptor (supplied), using the 
micro USB cable (supplied).
Connect the AC Adaptor to the wall outlet (wall socket).
ˎ
ˎ
Be sure to use only genuine Sony brand battery packs, micro USB cable 
(supplied) and AC Adaptor (supplied).
Charging time (Full charge)
The charging time is approximately 115 min. using the AC Adaptor (supplied).
To charge by connecting to a computer
The battery pack can be charged by connecting the camera to a computer using a 
micro USB cable.
To a USB jack
Battery life and number of images that can be recorded and 
played back
Total usage time
Number of images
Shooting (still images)
Approx. 105 min.
Approx. 210 images
Actual shooting (movies)
Approx. 35 min.
Continuous shooting (movies)
Approx. 50 min.
Viewing (still images)
Approx. 150 min.
Approx. 3000 images
ˎ
ˎ
The number is based on the CIPA standard. 
(CIPA: Camera & Imaging Products Association)
Inserting a memory card (sold separately)
Ensure the notched corner faces correctly.
Open the cover.
Insert the memory card (sold separately).
To remove the memory card/battery pack
Memory card: Push the memory card in once to eject the memory card.
Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.
Setting the clock
ON/OFF (Power)
Control Wheel
Select items: 
////  /
Set: 
Press the ON/OFF (Power) button.
Check that [Enter] is selected on the screen, then press 
 on 
the control wheel.
Select a desired geographic location by following the 
on-screen instructions, then press 
.
Set [Daylight Savings], [Date/Time] and [Date Format], then 
press 
.
Check that [Enter] is selected, then press 
.
To set the date and time again
Select MENU 
 
 (Setup) 4 
 [Date/Time Setup] to open the date & time 
setting display.
Shooting still images/movies
W: zoom out
T: zoom in
MOVIE
Shutter button
W/T (Zoom) lever
Shooting still images
Press the shutter button halfway down to focus.
Press the shutter button fully down to shoot an image.
Shooting movies
Press the MOVIE (Movie) button to start recording.
Press the MOVIE (Movie) button again to stop recording.
Viewing images
W: zoom out
T: zoom in
Control wheel
Select images: 
 (next)/ (previous) or turn the 
control wheel
Set: 
 (Delete)
 (Playback)
Press 
 (Playback) button.
Features of PlayMemories Home™
Importing images from your 
camera
You can use the following functions with 
Windows computers.
Viewing 
images on 
Calendar
Playing back images 
imported from your 
camera.
Sharing images on 
PlayMemories 
Online™
Creating 
movie discs
Uploading 
images to 
network 
services
ˎ
ˎ
An Internet connection is required to use PlayMemories Online or other network 
services. PlayMemories Online or other network services may not be available in 
some countries or regions.
Downloading PlayMemories Home
You can download PlayMemories Home from the following URL:
www.sony.net/pm/
ˎ
ˎ
For details on applications for Mac computers, visit the following URL:
http://www.sony.co.jp/imsoft/Mac/
Recommended computer environment
You can check the system requirements for software at the 
following URL.
www.sony.net/pcenv/
Notes on using the camera
On use and care
Avoid rough handling, disassembling, modifying, physical shock, or impact such as 
hammering, dropping, or stepping on the product. Be particularly careful of the lens.
On database files
When you insert a memory card without a database file into the camera and turn on the 
power, part of the memory card capacity is used to automatically create a database file. 
It may take some time until you can perform the next operation. If a database file error 
occurs, import all the images to a computer using PlayMemories Home, then format the 
memory card.
Notes on recording/playback
ˎ
ˎ
To ensure stable operation of the memory card, we recommend that you use this 
camera to format any memory card being used with this camera for the first time. Note 
that formatting will erase all data recorded on the memory card. This data cannot be 
restored. Be sure to back up any important data to a computer or other storage 
location. 
ˎ
ˎ
Before you start recording, make a trial recording to make sure that the camera is 
working correctly.
ˎ
ˎ
The camera is neither dust-proof, nor splash-proof, nor water-proof.
ˎ
ˎ
Avoid exposing the camera to water. If water enters inside the camera, a malfunction 
may occur. In some cases, the camera cannot be repaired.
ˎ
ˎ
Do not aim the camera at the sun or other bright light. It may cause the malfunction of 
the camera.
ˎ
ˎ
Do not use the camera near a location that generates strong radio waves or emits 
radiation. Otherwise, the camera may not properly record or play back images.
ˎ
ˎ
Using the camera in sandy or dusty locations may cause malfunctions.
ˎ
ˎ
Do not shake or strike the camera. It may cause a malfunction and you may not be 
able to record images. Furthermore, the recording media may become unusable or 
image data may be damaged.
ˎ
ˎ
Clean the flash surface before use. The heat of the flash emission may cause dirt on 
the flash surface to start smoking or burning. Wipe the flash surface with a soft cloth 
to remove dirt or dust, etc.
On camera’s temperature
Your camera and battery may get hot due to continuous use, but it is not a malfunction.
On the overheat protection
Depending on the camera and battery temperature, you may be unable to record movies 
or the power may turn off automatically to protect the camera. A message will be 
displayed on the screen before the power turns off or you can no longer record movies. 
In this case, leave the power off and wait until the camera and battery temperature goes 
down. If you turn on the power without letting the camera and battery cool enough, the 
power may turn off again or you may be unable to record movies.
Note on wireless LAN
We assume no responsibility whatsoever for any damage caused by unauthorized 
access to, or unauthorized use of, destinations loaded on the camera, resulting from 
loss or theft.
Warning on copyright
Television programs, films, videotapes, and other materials may be copyrighted.
Unauthorized recording of such materials may be contrary to the provisions of the 
copyright laws.
No compensation for damaged content or recording failure
Sony cannot compensate for failure to record or loss or damage of recorded content 
due to a malfunction of the camera or recording media, etc.
On moisture condensation
If the camera is brought directly from a cold to a warm location, moisture may condense 
inside or outside the camera. This moisture condensation may cause a malfunction of 
the camera.
If moisture condensation occurs
Turn off the camera and wait about an hour for the moisture to evaporate. Note that if 
you attempt to shoot with moisture remaining inside the lens, you will be unable to 
record clear images.
How to store the battery pack
ˎ
ˎ
To prevent staining the terminal, short-circuiting, etc., be sure to use a plastic bag, etc. 
to keep away from metal materials when carrying or storing.
ˎ
ˎ
A battery pack that has not been used for more than one year may have deteriorated.
Specifications
Camera
[System]
Image device: 7.76 mm (1/2.3 type) Exmor R
TM
 CMOS sensor
Total pixel number of camera: Approx. 18.9 Megapixels
Effective pixel number of camera: Approx. 18.2 Megapixels
Lens: Sony G 10× zoom lens
f = 4.45 mm – 44.5 mm (25 mm – 250 mm (35 mm film equivalent))
F3.3 (W) – F5.9 (T)
While shooting movies (16:9): 27.5 mm – 275 mm*
While shooting movies (4:3): 33.5 mm – 335 mm*
* When [  SteadyShot] is set to [Standard]
SteadyShot: Optical
File format:
Still images: JPEG (DCF, Exif, MPF Baseline) compliant, DPOF compatible
Movies (AVCHD format):
AVCHD format Ver. 2.0 compatible
Video: MPEG-4 AVC/H.264
Audio: Dolby Digital 2ch, equipped with Dolby Digital Stereo Creator
• Manufactured under license from Dolby Laboratories.
Movies (MP4 format):
Video: MPEG-4 AVC/H.264
Audio: MPEG-4 AAC-LC 2ch
Recording media: Memory Stick PRO Duo™ media, Memory Stick Micro™ media, SD 
cards, microSD memory cards
Flash: Flash range (ISO sensitivity (Recommended Exposure Index) set to Auto):
Approx. 0.2 m to 3.7 m (7 7/8 in to 12 ft 1 3/4 in) (W)
Approx. 1.5 m to 2.2 m (4 ft 11 1/8 in to 7 ft 2 5/8 in) (T)
[Input and Output connectors]
HDMI connector: HDMI micro jack
Multi/Micro USB Terminal*: USB communication
USB communication: Hi-Speed USB (USB 2.0)
* Supports Micro USB compatible device.
[Screen]
LCD screen: 6.7 cm (2.7 type) TFT drive
Total number of dots: 460 800 dots
[Power, general]
Power: Rechargeable battery pack NP-BN, 3.6 V
AC Adaptor AC-UB10C/UB10D, 5 V
Power consumption (during shooting): Approx. 1.2 W
Operating temperature: 0 °C to 40 °C (32 °F to 104 °F)
Storage temperature: –20 °C to +60 °C (–4 °F to +140 °F)
Dimensions (CIPA compliant):
92.3 mm × 52.4 mm × 21.6 mm (3 3/4 in × 2 1/8 in × 7/8 in) (W/H/D)
Mass (CIPA compliant) (including NP-BN battery pack, Memory Stick PRO Duo media):
Approx. 122 g (4.3 oz)
Microphone: Stereo
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III: Compatible
[Wireless LAN]
Supported standard: IEEE 802.11 b/g/n
Frequency: 2.4GHz
Supported security protocols: WEP/ WPA-PSK/WPA2-PSK
Configuration method: WPS (Wi-Fi Protected Setup) / manual
Access method: Infrastructure Mode
NFC: NFC Forum Type 3 Tag compliant
AC Adaptor AC-UB10C/UB10D
Power requirements: AC 100 V to 240 V, 50 Hz/60 Hz, 70 mA
Output voltage: DC 5 V, 0.5 A
Operating temperature: 0 °C to 40 °C (32 °F to 104 °F)
Storage temperature: –20 °C to +60 °C (–4 °F to +140 °F)
Dimensions:
Approx. 50 mm × 22 mm × 54 mm (2 in × 7/8 in × 2 1/4 in) (W/H/D)
Rechargeable battery pack NP-BN
Battery type: Lithium-ion battery
Maximum voltage: DC 4.2 V
Nominal voltage: DC 3.6 V
Maximum charge voltage: DC 4.2 V
Maximum charge current: 0.9 A
Capacity: 
Typical: 2.3 Wh (630 mAh)
Minimum: 2.2 Wh (600 mAh)
Design and specifications are subject to change without notice.
Trademarks
ˎ
ˎ
Memory Stick and 
 are trademarks or registered trademarks of Sony Corporation.
ˎ
ˎ
"AVCHD Progressive" and "AVCHD Progressive" logotype are trademarks of Panasonic 
Corporation and Sony Corporation.
ˎ
ˎ
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
ˎ
ˎ
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo 
are trademarks or registered trademarks of HDMI Licensing LLC in the United States 
and other countries.
ˎ
ˎ
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks 
of Microsoft Corporation in the United States and/or other countries.
ˎ
ˎ
Mac is a registered trademark of Apple Inc. in the United States and other countries.
ˎ
ˎ
iOS is a registered trademark or trademark of Cisco Systems, Inc.
ˎ
ˎ
Android, Google Play are trademarks of Google Inc.
ˎ
ˎ
Wi-Fi, the Wi-Fi logo, Wi-Fi PROTECTED SET-UP are registered trademarks of the Wi-Fi 
Alliance.
ˎ
ˎ
iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other 
countries.
ˎ
ˎ
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United 
States and in other countries.
ˎ
ˎ
DLNA and DLNA CERTIFIED are trademarks of Digital Living Network Alliance.
ˎ
ˎ
SDXC logo is a trademark of SD-3C, LLC.
ˎ
ˎ
Facebook and the “f” logo are trademarks or registered trademarks of Facebook, Inc.
ˎ
ˎ
YouTube and the YouTube logo are trademarks or registered trademarks of Google Inc.
ˎ
ˎ
In addition, system and product names used in this manual are, in general, trademarks 
or registered trademarks of their respective developers or manufacturers. 
However, the ™ or ® marks may not be described in this manual.
Additional information on this product and answers to frequently asked 
questions can be found at our Customer Support Website.
http://www.sony.net/
To select next/previous image
Select an image by pressing 
 (next)/ (previous) on the control wheel or by 
turning the control wheel.
Press 
 on the control wheel to view movies.
To delete an image
 Press   (Delete) button.
 Select [Delete] with  on the control wheel, then press .
Digital Still Camera
Cámara fotografía digital
Instruction Manual
Manual de instrucciones
4-532-016-
21(1)
DSC-WX220
©2014 Sony Corporation 
Printed in China
English
Learning more about the camera (“Help Guide”)
“Help Guide” is an on-line manual. Refer to it for in-depth
instructions on the many functions of the camera.
 Access the Sony support page. 
http://www.sony.net/SonyInfo/Support/
 Select your country or region.
 Search for the model name of your camera within the support 
page.
ˎ
ˎ
Check the model name on the bottom of your camera.
Checking the supplied items
The number in parentheses indicates the number of pieces.
ˎ
ˎ
Camera (1)
ˎ
ˎ
Rechargeable battery pack NP-BN (1)
(This rechargeable battery pack cannot be used with Cyber-shot
TM
 that are 
supplied with the NP-BN1 battery pack.)
ˎ
ˎ
Micro USB cable (1)
ˎ
ˎ
AC Adaptor AC-UB10C/UB10D (1)
ˎ
ˎ
Power cord (mains lead) (not supplied in the USA, Canada and China) (1)
ˎ
ˎ
Wrist strap (1)
ˎ
ˎ
Instruction Manual (this manual) (1)
ˎ
ˎ
Wi-Fi Connection/One-touch (NFC) Guide (1)
This Guide describes the function using Wi-Fi.
Owner’s Record
The model and serial numbers are located on the bottom. Record the serial 
number in the space provided below. Refer to these numbers whenever you call 
your Sony dealer regarding this product.
Model No. DSC-WX220
Serial No. ______________________________
Model No. AC-UB10C/AC-UB10D
Serial No. ______________________________
WARNING
To reduce fire or shock hazard, do not expose the unit to rain or 
moisture.
IMPORTANT SAFETY INSTRUCTIONS
-SAVE THESE INSTRUCTIONS
DANGER
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE 
INSTRUCTIONS
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the 
proper configuration for the power outlet.
CAUTION
Battery pack
If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical 
burns. Observe the following cautions.
ˎ
ˎ
Do not disassemble.
ˎ
ˎ
Do not crush and do not expose the battery pack to any shock or force such as hammering, 
dropping or stepping on it.
ˎ
ˎ
Do not short circuit and do not allow metal objects to come into contact with the battery 
terminals.
ˎ
ˎ
Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a car 
parked in the sun.
ˎ
ˎ
Do not incinerate or dispose of in fire.
ˎ
ˎ
Do not handle damaged or leaking lithium ion batteries.
ˎ
ˎ
Be sure to charge the battery pack using a genuine Sony battery charger or a device that can 
charge the battery pack.
ˎ
ˎ
Keep the battery pack out of the reach of small children.
ˎ
ˎ
Keep the battery pack dry.
ˎ
ˎ
Replace only with the same or equivalent type recommended by Sony.
ˎ
ˎ
Dispose of used battery packs promptly as described in the instructions.
AC Adaptor
Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor 
from the wall outlet (wall socket) immediately if any malfunction occurs while using the 
apparatus.
For Customers in the U.S.A. and Canada
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable.
You can help preserve our environment by returning your used rechargeable 
batteries to the collection and recycling location nearest you.
For more information regarding recycling of rechargeable batteries,  
call toll free
1-800-822-8837, or visit http://www.call2recycle.org/
Caution: Do not handle damaged or leaking Lithium-Ion batteries.
Battery pack
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.
CAN ICES-3 B/NMB-3 B
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines
in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that are deemed to comply without
testing of specific absorption ratio (SAR).
For Customers in the U.S.A.
If you have any questions about this product, you may call:
Sony Customer Information Center
1-800-222-SONY (7669)
The number below is for the FCC related matters only.
Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: DSC-WX220
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired 
operation.
This equipment must not be co-located or operated in conjunction with any other antenna or 
transmitter.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual 
could void your authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:
ˎ
ē Reorient or relocate the receiving antenna.
ˎ
ē Increase the separation between the equipment and receiver.
ˎ
ē Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
ˎ
ē Consult the dealer or an experienced radio/TV technician for help.
The supplied interface cable must be used with the equipment in order to comply with the 
limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
For Customers in Canada
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, 
and (2) this device must accept any interference, including interference that may cause 
undesired operation of the device.