Nikon 6MB07411-03 User Manual (en)

Download
162
r
6
Select preset d-0.
If the new value for preset white balance will be used 
immediately, select preset d-0 by pressing the WB button and 
rotating the sub-command dial until d-0 is displayed in the 
rear control panel.
D
Direct Measurement Mode
If no operations are performed while the displays are flashing, direct 
measurement mode will end in the time selected for Custom Setting c2 
(Auto meter-off delay
0 305).
A
Preset d-0
The new value for white balance will be stored 
in preset d-0, automatically replacing the 
previous value for this preset (no confirmation 
dialog will be displayed). A thumbnail will be 
displayed in the preset white balance list 
(
0 163).
To use the new value for white balance, select preset d-0 (if no value has 
been measured for white balance before d-0 is selected, white balance 
will be set to a color temperature of 5,200 K, the same as Direct 
sunlight
). The new white balance value will remain in preset d-0 until 
white balance is measured again. By copying preset d-0 to one of the 
other presets before measuring a new value for white balance, up to five 
white balance values can be stored (
0 163).