Nikon 6MB07411-03 User Manual (en)

Download
386
n
Replacing the Clock Battery
The camera clock is powered by a CR1616 lithium battery with a life 
of about four years. If the B icon is displayed in the top control 
panel while the exposure meters are on, the battery is running low 
and needs to be replaced. When the battery is exhausted, the B 
icon will blink while the exposure meters are on. Photographs can 
still be taken but will not be stamped with the correct time and 
date, and interval timer photography will not function correctly. 
Replace the battery as described below.
1
Remove the main battery.
The clock battery chamber is located on the roof of the main 
battery chamber. Turn the camera off and remove the EN-EL4a 
battery.
2
Open the clock battery chamber.
Slide the clock battery chamber cover 
toward the front of the main battery 
chamber.
3
Remove the clock battery.
4
Insert the replacement battery.
Insert a new CR1616 lithium battery so 
that the positive side (the side marked 
with “+” and the battery name) is visible.