Panasonic DMC-GH1 User Manual (ja)

Download
143
VQT2A61
Advanced (Playback)
∫ Canceling all the [PRINT SET] settings
1
Select [CANCEL] on the screen shown in step 
2
 and then press [MENU/SET].
2
Press 
3 to select [YES] and then press [MENU/SET].
3
Press [MENU/SET] to close the menu.
You cannot select [CANCEL] if not even one picture has been set for printing.
∫ To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing [DISPLAY].
When you go to a photo printing store for digital printing, be sure to order the printing of the 
date additionally if required.
Depending on the photo printing store or the printer, the date may not be printed even if you set 
to print the date. For further information, ask at your photo printing store or refer to the 
operating instructions for the printer.
The date cannot be printed on pictures stamped with text.
Note
The number of prints can be set from 0 to 999.
With a printer supporting PictBridge, the date print settings of the printer may take precedence 
so check if this is the case.
It may not be possible to use the print settings with other equipment. In this case, cancel all the 
settings, and reset the settings.
If the file is not based on the DCF standard, the print setting cannot be set.
[PRINT SET] cannot be set for motion pictures recorded in [AVCHD] and pictures that were 
taken with the [QUALITY] set to [
].
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] mode menu. (P30)
Press [] to return to the menu screen.
Press [MENU/SET] to close the menu.
[PROTECT]
Press 
3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture, and then 
press [MENU/SET].
When [MULTI] has been selected
Repeat these steps for each picture.
The settings are canceled when 
[MENU/SET] is pressed again.
[SINGLE]
[MULTI]
Press 
2/1 to select 
the picture.
Press 
3/4/2/1 to 
select the pictures.
DMC-GH1KPP-VQT2A61_eng.book  143 ページ  2009年4月14日 火曜日 午後2時45分