Panasonic DMC-GH1 User Manual (ja)

Download
153
VQT2A61
Connecting to other equipment
Connect the camera to a PC via the USB connection cable 
A 
(supplied).
Do not use any other USB connection cables except the supplied one. Use of 
cables other than the supplied USB connection cable may cause malfunction.
Press 
3/4 to select [PC], and then press [MENU/SET].
If [USB MODE] (P36) is set to [PC] in the [SETUP] menu in 
advance, the camera will be automatically connected to the PC 
without displaying the [USB MODE] selection screen. Since 
there is no need to set this each time you connect to the PC, it 
is convenient.
When the camera has been connected to the PC with [USB MODE] set to 
[PictBridge(PTP)], a message may appear on the PC’s screen. Select [Cancel] to close 
the screen, and disconnect the camera from the PC. Then set [USB MODE] to [PC] 
again.
Double-click on [Removable Disk] in [My Computer].
When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME” 
or “Untitled” is displayed.)
Double-click [DCIM] folder.
Acquiring of still pictures and [MOTION JPEG] motion pictures 
(other than [AVCHD] motion pictures)
Preparations: Turn the LCD monitor so the LCD will show out.
Turn on the camera and the PC.
A USB connection cable (supplied)
Check the directions of the connectors, and plug them straight in or unplug them straight out. 
(Otherwise the connectors may be bent out of shape which will cause trouble.)
B Align the marks, and insert.
C AC adaptor (supplied)
Use a battery with sufficient battery power or the AC adaptor (P25). If the remaining battery 
power becomes low while the camera and the PC are communicating, the status indicator 
blinks and the alarm beeps.
Refer to 
Disconnecting the USB connection cable safely
 (P154) before disconnecting the 
USB connection cable. Otherwise, data may be destroyed.
USB MODE
SELECT
SET
PLEASE SELECT 
THE USB MODE
PictBridge(PTP)
PC
MENU
DMC-GH1KPP-VQT2A61_eng.book  153 ページ  2009年4月14日 火曜日 午後2時45分