Panasonic DMC-GH1 User Manual (ja)

Download
VQT2A61
72
Advanced (Recording pictures)
[REC] mode: 
Taking Pictures using Burst Mode
Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.
Set the drive mode lever to [
].
Focus on the subject and take a picture.
A When Burst Mode is set to high speed [H].
Hold down the shutter button fully to activate the 
Burst Mode.
∫ Changing the burst speed
1
Select [BURST RATE] in the [REC] mode menu. (P30)
2
Press 
3/4 to select the burst speed and then press 
[MENU/SET].
3
Press [MENU/SET] to close the menu.
You can also press the shutter button halfway to close the menu.
¢1 Number of recordable pictures
¢2 Pictures can be taken until the capacity of the card becomes full. However the burst speed 
will become slower halfway. The exact timing of this depends on the aspect ratio, the picture 
size, the setting for the quality and the type of card used.
First burst speed has no relation with the transfer speed of the card.
The burst speed values given above apply when the shutter speed is 1/60 or faster and when 
the flash is not activated.
The Burst Mode speed may become slower depending on the following settings.
[SENSITIVITY] (P86)/[PICTURE SIZE] (P117)/[QUALITY] (P118)/[FOCUS PRIORITY] 
(P128)/Focus mode
Refer to P118 for information about RAW files.
[H] (High speed)
[L] (Low speed)
Burst speed (pictures/second)
3
2
¢
1
With RAW files
4 to 7
¢2
Without RAW files
Depends on the remaining capacity of the card
¢2
A
DMC-GH1KPP-VQT2A61_eng.book  72 ページ  2009年4月14日 火曜日 午後2時45分