Panasonic DMCGX1XS User Manual (en)

Connecting to other equipment
- 192 -
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and instruct that printing be started on the camera’s LCD monitor.
Burst pictures will be displayed as a list, and not as a group.
Some printers can print directly from the card removed from the camera. For details, refer to 
the operating instructions of your printer.
A USB connection cable (supplied)
Check the directions of the connectors, and plug them straight in or unplug them straight out. 
(Otherwise the connectors may be bent out of shape which may cause malfunction.)
B Align the marks, and insert.
Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery 
power becomes low while the camera and the printer are connected, the status indicator blinks 
and the alarm beeps. If this happens during printing, stop printing at once. If not printing, 
disconnect the USB connection cable.
Connect the camera to a printer via the USB connection cable 
3/4 to select [PictBridge(PTP)], and then press [MENU/SET].
Do not disconnect the USB cable while [å] (Cable disconnect prohibit icon) is displayed.
Do not use any other USB connection cables except the supplied one. Use of cables other than 
the supplied USB connection cable may cause malfunction.
Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
Before inserting or removing a card, turn the camera off, and disconnect the USB connection 
Motion pictures recorded cannot be printed out.
Preparations: Turn on the camera and the printer.
Perform the print quality and other settings at the printer before printing the