Panasonic DMCGX1XS User Manual (en)

Download
Others
- 212 -
[MEMORY CARD PARAMETER ERROR]/[THIS MEMORY CARD CANNOT BE USED]
> Use a card compatible with this unit
SD Memory Card (8 MB to 2 GB)
SDHC Memory Card (4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)
[INSERT SD CARD AGAIN]/[TRY ANOTHER CARD]
An error has occurred accessing the card.
> Insert the card again.
> Insert a different card.
[READ ERROR/WRITE ERROR
PLEASE CHECK THE CARD]
It has failed to read or write data.
> Remove the card after turning the power [OFF]. Insert the card again, turn the power on, 
and try to read or write the data again.
The card may be broken.
> Insert a different card.
[CANNOT RECORD DUE TO INCOMPATIBLE FORMAT (NTSC/PAL) DATA ON THIS 
CARD.]
> If you want to delete some pictures, format the card after saving necessary data on a PC 
etc.
> Insert a different card.
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE 
WRITING SPEED OF THE CARD]
Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.
In the event that it stops even after using a “Class 4” card or higher, the data writing speed has 
deteriorated so it is recommended to make a backup and then format 
Depending on the type of the card, motion picture recording may stop in the middle.
[A FOLDER CANNOT BE CREATED]
A folder cannot be created because there are no remaining folder numbers that can be used.
> Format the card after saving necessary data on a PC etc. 
 If you execute 
[NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100.