Nikon 13187 User Guide (en)

Download
122
r
3
Select a preset.
Press the 
L (U) button and rotate the sub-command dial until the desired 
white balance preset (d-1 to d-4) is displayed in the control panel.
4
Select direct measurement mode.
Release the 
L (U) button briefly and then press the 
button until the 
L icon in the control panel starts to 
flash. A flashing 
D will also appear in the viewfinder. 
The displays will flash for about six seconds.
5
Measure white balance.
Before the indicators stop flashing, frame the reference 
object so that it fills the viewfinder and press the 
shutter-release button all the way down. The camera 
will measure a value for white balance and store it in the preset selected in Step 
3. No photograph will be recorded; white balance can be measured accurately 
even when the camera is not in focus.
L (U) button
Sub-command dial
Control panel
A
Protected Presets
If the current preset is protected (
0 127), 3 will flash in the control panel and viewfinder 
if you attempt to measure a new value.
Control panel
Viewfinder