Nikon 13187 User Guide (en)

Download
303
n
❚❚Manual Cleaning
If foreign matter can not be removed from the low-pass filter using the Clean image 
sensor
 option in the setup menu (
0 301), the filter can be cleaned manually as 
described below. Note, however, that the filter is extremely delicate and easily 
damaged. Nikon recommends that the filter be cleaned only by Nikon-authorized 
service personnel.
1
Charge the battery or connect an AC adapter.
A reliable power source is required when inspecting or cleaning the low-pass 
filter. Turn the camera off and insert a fully-charged EN-EL15 battery or connect 
an optional EP-5B power connector and EH-5b AC adapter. The Lock mirror up 
for cleaning
 option is only available in the setup menu at battery levels over 
J.
2
Remove the lens.
Turn the camera off and remove the lens.
3
Select Lock mirror up for cleaning.
Turn the camera on and press the 
button to display the menus. Highlight Lock 
mirror up for cleaning
 in the setup menu 
and press 
2.
4
Press 
J.
The message shown at right will be 
displayed in the monitor and a row of dashes 
will appear in the control panel and 
viewfinder. To restore normal operation 
without inspecting the low-pass filter, turn 
the camera off.
G button