Nikon 13187 User Guide (en)

Download
327
n
Diopter adjustment
–3–+1 m
–1
Focusing screen
Type B BriteView Clear Matte Mark VIII screen with AF area brackets 
(framing grid can be displayed)
Reflex mirror
Quick return
Depth-of-field preview
Pressing depth-of-field preview button stops lens aperture down to 
value selected by user (A and M modes) or by camera (other modes)
Lens aperture
Instant return, electronically controlled
Lens
Compatible lenses
Compatible with AF NIKKOR lenses, including type G and D lenses (some 
restrictions apply to PC lenses) and DX lenses (using DX 24 × 16 1.5× 
image area), AI-P NIKKOR lenses, and non-CPU AI lenses (A and M modes 
only). IX NIKKOR lenses, lenses for the F3AF, and non-AI lenses can not be 
used.
The electronic rangefinder can be used with lenses that have a 
maximum aperture of f/5.6 or faster (the electronic rangefinder supports 
the center 7 focus points with lenses that have a maximum aperture of 
f/8 or faster and the center 33 focus points with lenses that have a 
maximum aperture of f/6.8 or faster)
Shutter
Type
Electronically-controlled vertical-travel focal-plane shutter
Speed
1
/
4000
 – 30 s in steps of 
1
/
3
 or 
1
/
2
EV, bulb, time (requires optional ML-L3 
remote control), X200
Flash sync speed
X=
1
/
200
s; synchronizes with shutter at 
1
/
250
s or slower (flash range drops 
at speeds between 
1
/
200
 and 
1
/
250
s)
Release
Release mode
S
 (single frame), C
L
 (continuous low speed), C
H
 (continuous high speed), 
J (quiet shutter-release), E (self-timer), 4 (remote control), M
UP
 (mirror 
up)
Frame advance rate
1–5 fps (C
L
) or 5.5 fps (C
H
)
Self-timer
2 s, 5 s, 10 s, 20 s; 1–9 exposures at intervals of 0.5, 1, 2, or 3 s
Remote release modes
Delayed remote, quick-response remote, remote mirror-up
Exposure
Metering
TTL exposure metering using 2,016-pixel RGB sensor
Metering method
• Matrix: 3D color matrix metering II (type G and D lenses); color matrix 
metering II (other CPU lenses); color matrix metering available with 
non-CPU lenses if user provides lens data
• Center-weighted: Weight of 75% given to 12 mm circle in center of frame. 
Diameter of circle can be changed to 8, 15, or 20 mm, or weighting can 
be based on average of entire frame (non-CPU lenses use 12-mm circle 
or average of entire frame)
• Spot: Meters 4 mm circle (about 1.5% of frame) centered on selected 
focus point (on center focus point when non-CPU lens is used)
Range (ISO 100, f/1.4 
lens, 20 °C/68 °F)
• Matrix or center-weighted metering: 0–20 EV
• Spot metering: 2–20 EV
Viewfinder