Konica Minolta Z1 Leaflet (en)

Download
No. of prints:
Print size:
Data print:
7
Printer setup
Printer setup
Printer setup
Printer setup
Print quality:
Layout:
:start
When PictBridge is active, the transfer-mode
option is displayed in section 4 of the setup
menu. This amends page 85 in the DiMAGE
Z1 instruction manual. Two transfer modes
are available:
Data storage - to transfer data between the
camera and computer. This option must be
selected when moving image files to the
computer, using the camera with the DiMAGE
Viewer software, or printing with USB
DIRECT PRINT.
PictBridge - to print images with a PictBridge
compatible printer. 
© 2003 Konica Minolta Camera, Inc. under the Berne Convention 
and the Universal Copyright Convention.
9222-2724-23 SY-A309
Printed in Japan
1AG6P1P1853--
INSTRUCTION MANUAL
E
A
MENDMENTS
Please take the time to read through this instruction manual so you can
enjoy all the features of your new camera. This instruction manual does not
provide instruction in printer operation. Refer to the manual that was
supplied with the printer. This manual assumes you understand the basic
operation of the camera described the camera’s instruction manual.
BEFORE YOU BEGIN
Konica Minolta is a trademark of Konica Minolta Holdings, Inc. DiMAGE is a trademark
or registered trademark of Konica Minolta Camera, Inc. USB DIRECT-PRINT is a
trademark of Seiko Epson Corporation. PictBridge and the PictBridge logo are
trademarks of the Camera & Imaging Products Association (CIPA). All other brand and
product names are trademarks or registered trademarks of their respective owners.
If PictBridge is not active in the camera,
section 4 of the setup menu will display only
one menu option: video output. 
With the section 4 tab highlighted, press the
hold the central button of the controller (1),
and then press and hold the information (i+)
button (2) until the transfer-mode option
appears.
ACTIVATING PictBridge
Video output
Transfer mode
NTSC
Data storage
Video output
NTSC
2
1
SETUP MENU AMENDMENTS
USB DIRECT-PRINT AND DPOF PRINT NOTES
To use USB DIRECT-PRINT, the transfer-mode option in section 4 of the
setup menu must be set to data storage. To make prints, read the
instructions on pages 102 - 104 of the camera manual.
DPOF file created with the camera can be printed directly from the camera
with a DPOF compatible printer. See page 105 in the camera manual. The
DPOF-print option on the menu is switched from section 2 to section 3.
H
OW TO USE
Print file?
Number of prints: 7
No
Yes
When using USB DIRECT-PRINT or DPOF
print, the print-file message described in the
camera manual has been replaced with the
print-setup confirmation screen. Press the
central button of the controller to begin
printing, or press the menu button to return to
the main screen.
Print-setup confirmation screen