Nikon 26462B User Manual (en)

Download
E
79
Re
fe
ren
ce
 S
e
ct
io
n
All images are hidden.
• There are no images available for a slide 
show, etc.
• There are no images that can be displayed on 
the image selection screen for deletion.
This image cannot be 
deleted.
The image is protected.
Disable protection.
Raise the flash.
• When the scene mode is Scene auto 
selector, you can take an image even if the 
flash is lowered but the flash will not fire.
• When the scene mode is Night portrait or 
Backlighting with HDR set to Off, you must 
raise the flash to take an image.
No access.
The camera could not receive the 
communication signal from the smart device. 
Select Connect to smart device in the Wi-Fi 
options menu, and wirelessly connect the 
camera and smart device again.
Could not connect.
The camera failed to establish the connection 
while receiving the communication signals from 
the smart device. Select a different channel for 
Channel in Options in the Wi-Fi options menu 
and establish the wireless connection again.
Wi-Fi connection 
terminated.
A cable was connected to the camera while the 
camera and smart device were wirelessly 
connected, the battery level became low, or the 
connection was aborted due to poor 
connectivity. Check the status of the camera and 
establish the wireless connection again.
Lens error
A lens error occurred.
Turn the camera off and then on again. If the 
error persists, contact your retailer or Nikon-
authorized service representative.
Communications 
error
An error occurred while communicating with 
the printer.
Turn the camera off and reconnect the USB 
cable.
System error
An error occurred in the camera’s internal circuitry.
Turn the camera off, remove and reinsert the 
battery, and turn the camera on. If the error 
persists, contact your retailer or Nikon-
authorized service representative.
Display
Cause/Solution
A