Nikon 26462B User Manual (en)

Download
Te
chnica
l Notes and 
Inde
x
F
9
Camera turns off 
without 
warning.
• The camera automatically turns off to save power 
(auto off function).
• The camera or battery has become too cold and 
cannot operate properly.
• The inside of the camera has become hot. Leave the 
camera off until the inside of the camera has cooled, 
and then try turning it on again.
The monitor or 
viewfinder is 
blank.
• The camera is off.
• The battery is exhausted.
• The camera has entered standby mode to save 
power. Press the power switch, shutter-release 
button, 
c button or b (e movie-record) button, 
or rotate the mode dial.
• You cannot turn on both the monitor and viewfinder 
at the same time. It may take a while to switch 
between the monitor and viewfinder.
• The camera and computer are connected via a USB 
cable.
• The camera and TV are connected via an HDMI cable.
• Interval timer shooting in progress.
• Wi-Fi is connected.
Monitor is hard 
to see.
• The ambient light is too bright. Move to a darker 
place or use the viewfinder.
• Adjust the monitor brightness.
• The monitor is dirty. Clean the monitor.
Image in the 
viewfinder is 
difficult to see.
Adjust the viewfinder using the diopter adjustment 
control.
Date and time of 
recording are 
not correct.
• If the camera clock has not been set, the “Date not 
set” indicator flashes during shooting and movie 
recording. Images and movies saved before the clock 
is set are dated “00/00/0000 00:00” or “01/01/2014 
00:00” respectively. Set the correct time and date 
from the Time zone and date option in the setup 
menu.
• The camera clock is not as accurate as ordinary 
watches or clocks. Periodically compare the time of 
the camera clock with that of a more accurate 
timepiece and reset as required.
Problem
Cause/Solution
A