Nikon 26462B User Manual (en)

Download
73
Sh
ooting Fea
tures
Metering
Allows you to set the method that the camera uses 
to measure the brightness of the subject.
• Default setting: Matrix
Continuous
Allows you to select single or continuous shooting.
• Default setting: Single
ISO sensitivity
Allows you to control the camera’s sensitivity to light.
• Default setting: Auto
When Auto is selected, E is displayed in the 
monitor while shooting if ISO sensitivity increases.
• In 
m (manual) mode, when set to Auto or Fixed 
range auto, the ISO sensitivity is fixed at ISO 100.
Exposure 
bracketing
The exposure (brightness) can be changed 
automatically during continuous shooting.
• Default setting: Off
AF area mode
Allows you to change the method of how the 
camera selects the focus area for autofocus.
• Default setting: Target finding AF
Autofocus mode
Allows you to select either Single AF, which focuses 
only when the shutter-release button is pressed 
halfway, or Full-time AF, which continues focusing 
even when the shutter-release button is not pressed 
halfway.
• Default setting: Single AF
Flash exp. comp.
Allows you to adjust the flash output.
• Default setting: 0.0 
Noise reduction 
filter
Allows you to set the strength of the noise reduction 
function that is normally performed when saving 
images.
• Default setting: Normal
Active D-Lighting
Allows you to prevent loss of contrast details in 
highlights and shadows and well reproduce the 
natural contrast that is seen with the naked eye when 
shooting images.
• Default setting: Off
Multiple 
exposure
Allows you to combine two to three images and save 
them as a single image.
• Default setting:
Multiple exposure modeOff
Auto gainOn
Save user 
settings
Allows you to save the current settings in mode dial 
M (A57).
Option
Description
A