Nikon D330018-55VR User Manual (en)

Download
132 P, S, A, and M Modes
D
Measuring Preset White Balance
If no operations are performed while the displays are flashing, direct 
measurement mode will end in the time selected for the Auto off 
timers
 option in the setup menu (
0 245). The default setting is eight 
seconds.
D
Preset White Balance
The camera can store only one value for preset white balance at a time; 
the existing value will be replaced when a new value is measured. 
Note that exposure is automatically increased by 1 EV when measuring 
white balance; when shooting in mode M, adjust exposure so that the 
exposure indicator shows ±0 (
A
Other Methods for Measuring Preset White Balance
To enter preset measurement mode (see above) after selecting preset 
white balance in the information display (
0 125), press J for a few 
seconds. If white balance has been assigned to the Fn button (
white balance preset measurement mode can be activated by keeping 
the Fn button pressed for a few seconds after selecting preset white 
balance with the Fn button and command dial.
A
Gray Panels
For more precise results, measure white balance using a standard gray 
panel.